Coatings

Elite Series / Oven Cure

Our highest performing thin film coating

Oven Cure / Available in 9 Plus Colors

Key Features

  • Increased Abrasion, Corrosion, Wear, Impact, Scratch, Chemical Resistance and Thermal Stability.
  • Maximum Hardness, Durability, Flexibility and Adhesion,
  • Excellent Spray ability, Coverage and Consistency
  • Lowest Coefficient of Friction, Rivaling Teflon.

Common Uses: tight tolerance parts, fasteners, valves, marine, energy, offshore and more.

Technical & Performance Data

  • Theoretical Solids by Weight ………………………….. 30 – 60%
  • Theoretical Coverage per Gallon at 1.0 mil ……….. 480 – 960 ft2
  • Viscosity (Brookfield Viscometer) …………………….. 60 – 120 cP
  • Recommended Film Thickness …………………………. 1.0 mil
  • Adhesion Cross-Cut Tape (ASTM D3359) ……………. 5B
  • Impact (ASTM 2794) ……………………………………….. 160/160 inch/lbs.
  • Mandrel Bend (ASTM D522) ……………………………. 0mm loss @ 180° Rotation
  • Liquid Density (g/mL) ………………………………………. 1.36 – 1.45
  • ASTM D3363 Exceeds 9h scratch and gouge hardness
  • ASTM D4060 Taber abrasion greater than 8000 wear cycles per mil
  • ASTM B117 Corrosion resistance more than 3000 hours
  • ASTM D522 0mm coating loss at 180o mandrel bend
  • Coefficient of Friction (Steady State Dynamic CoF Under Load) Equaling Teflon at 0.11
All Cerakote coatings are VOC compliant under the EPA and have low to no VOC content.